A medium-flow block copolymer combining stiffness with ambient and low-temperature toughness for injection-molded automotive and appliance components.
Values below are typical and indicative only; final specifications are confirmed per lot and order.
| Melt Flow Rate (230C/2.16kg) | 8 - 10 g/10min |
|---|---|
| Density | 0.90 g/cm³ |
| Tensile Yield Stress | 24 - 27 MPa |
| Elongation at Break | > 200 % |
| Flexural Modulus | 1100 - 1300 MPa |
| Notched Charpy (23C) | > 40 kJ/m² |
| Notched Charpy (-20C) | 5 - 9 kJ/m² |
| Vicat Softening Temp | 150 - 155 °C |
| HDT (0.45 MPa) | 85 - 95 °C |
A balanced impact copolymer for interior, exterior and under-hood components.
Dashboard and pillar covers with low gloss and stable dimensions.
Casings and structural shells with rigidity for load-bearing parts.
Washer and small-appliance housings with good surface finish.
Barrel 200-250°C, melt ~240°C; medium flow fills thin ribs and long flow paths.
30-60°C mold temperature balances surface quality and cycle time.
Hold pressure 60-80% of injection; keep residence under 10 min above 240°C.
Interior and exterior components with impact resistance.
Washing machine and small-appliance shells and bases.
Returnable crates and structural parts needing toughness.
Process window and gate design for thin-wall automotive parts.
Read More →
Request a factory quote for Sinopec PP K8009 in your required volume and packaging.
